LT1058ISW#PBF

LT1058 is a lowest offset quad JFET input operational amplifier in the standard 14-pin configuration. It offers significant accuracy improvement over presently available JFET input quad operational amplifiers. It can replace four single precision JFET input op-amps, while saving board space, power dissipation and cost. It is used in applications such as precision, high speed instrumentation, fast, precision sample-and-hold, logarithmic amplifiers, D/A output amplifiers, photodiode amplifiers, voltage-to-frequency converters, frequency-to-voltage converters.

• Slew rate is 13V/µs typical at (VS = ±15V, TA = 25°C, VCM = 0V)
• Gain-bandwidth product is 5MHz typical at (VS = ±15V, TA = 25°C, VCM = 0V)
• Supply current per amplifier is 1.7mA typical at (VS = ±15V, TA = 25°C, VCM = 0V)
• Input offset voltage is 0.7mV typical at (VS = ±15V, VCM = 0V, 0°C ≤ TA ≤ 70°C)
• Input bias current is ±60pA typical at (VS = ±15V, VCM = 0V, 0°C ≤ TA ≤ 70°C)
• Large-signal voltage gain is 200mV typical at (VS = ±15V, VCM = 0V, 0°C ≤ TA ≤ 70°C)
• Common mode rejection ratio is 96dB typical at (VS = ±15V, VCM = 0V, 0°C ≤ TA ≤ 70°C)
• Operating temperature is -40°C to 85°C
• Package style is 16-lead plastic WSOIC

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party