LTC4011CFE#TRPBF

LTC4011 is a high efficiency standalone nickel battery charger. It provides complete, cost-effective nickel battery fast charge solution in a small package using few external components. A 550KHz PWM current source controller and all necessary charge initiation, monitoring and termination control circuitry are included. This device automatically senses the presence of a DC adapter and battery insertion or removal. Heavily discharged batteries are precharged with a trickle current. It can simultaneously use both -∆V and ∆T/∆t fast charge termination techniques and can detect various battery faults. If necessary, a top-off charge is automatically applied to NiMH batteries after fast charging is completed. The IC will also resume charging if the battery self-discharges after a full charge cycle. It is used in applications such as integrated or standalone battery charger, portable instruments or consumer products, battery-powered diagnostics and control, back-up battery management etc.

• Complete NiMH/NiCd charger for 1 to 16 cells, no microcontroller or firmware required
• No audible noise with ceramic capacitors
• PowerPath™ control support
• Programmable charge current: 5% accuracy
• Wide input voltage range is 4.5V to 34V
• Automatic trickle precharge, automatic NiMH top-off charge
• Programmable timer, automatic recharge
• Multiple status outputs, micropower shutdown
• Operating ambient temperature is 0°C to 85°C
• Package style is 20-lead plastic TSSOP

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party