MAX713CSE+

The MAX713CSE+ is a NiCd/NiMH battery Fast-charge Controller. The MAX713 fast-charge nickel metal hydride (NiMH) and nickel cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analogue-to-digital converter, timer and temperature window comparator determine charge completion. The MAX713 is powered by the DC source via an on-board +5V shunt regulator. They draw a maximum of 5μA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery's load.

• Fast-charge NiMH or NiCd batteries
• Voltage slope, temperature and timer fast-charge cut-off
• Charge 1 to 16 series cells
• Supply battery's load while charging (linear mode)
• Fast charge from C/4 to 4C rate
• C/16 Trickle-charge rate
• Automatically switch from fast to trickle charge
• Linear mode power control
• 5µA Maximum drain on battery when not charging
• 5V Shunt regulator powers external logic

애플리케이션

Computers & Computer Peripherals, Consumer Electronics, Portable Devices

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party