ACC15, 1KG

ACC15 is a low viscosity, 1-component, condensation curing silicone conformal coating. This uncured product can be applied by pouring or brushing and is readily cured to a tough, transparent rubber. It can be used to coat printed circuit boards to prevent ingress of water and environmental contaminants. Bulk product may be poured or brushed onto the circuit. Pouring or brushing will give a film thickness of 100 to 1000microns. This product contains an UV trace to allow inspection of the board after coating to ensure complete and even coverage. Boards should be thoroughly cleaned before coating for best adhesion/performance. Coating over no clean fluxes is possible so long as other surface contaminants are not present.

• Room temperature cure or mild heat acceleration at 60°C
• 100% solids, low odour
• UL listed file number E493561
• Fluorescent UV aid for production QA checks, excellent adhesion to many substrates
• Colour is translucent pale yellow
• Appearance is liquid, weight is 1kg
• Flash point is <gt/>150°C (ASTM D93)
• Service temperature is -55°C to 200°C
• Density is at 25°C is 1.02g/ml (ASTM D70)