9,000 지금 제품을 예약하실 수 있습니다
수량 | 가격 |
---|---|
1+ | ₩5,562 |
10+ | ₩4,008 |
25+ | ₩3,863 |
100+ | ₩3,486 |
250+ | ₩3,224 |
500+ | ₩2,948 |
3000+ | ₩2,890 |
제품 정보
제품 개요
The DS1818R-10+T&R is an EconoReset Supervisory Circuit with pushbutton. The DS1818 EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 150 ms to allow the power supply and processor to stabilize. The DS1818 also monitors a pushbutton on the reset output. If the reset line is pulled low, a reset is generated upon release and the DS1818 output will be held in reset output low for typically 150ms.
- Improves reliability of processor operation - Monitors pushbutton for external override
- Efficient open-drain output with internal 5.5kΩ pull-up resistor saves power and space
- Allows for easy design with no complicated settings
애플리케이션
Industrial
메모
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
기술 사양
-
1Monitors
5.5V
SOT-23
Surface Mount
-40°C
-
-
-
2.88V
2.88V
1V
Active-Low
3Pins
150ms
85°C
-
No SVHC (21-Jan-2025)
SOT-23
기술 문서 (1)
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:Philippines
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서