MAX3243EAI+

MAX3243EAI+ is a RS-232 transceiver with AutoShutdown. It achieves 1µA supply current with the AutoShutdown™ feature. When the device does not sense a valid signal level on its receiver inputs, the onboard power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned off. The system turns on again when a valid level is applied to any RS-232 receiver input. A proprietary, high-efficiency, dual charge-pump power supply and a low-dropout transmitter combines to deliver true RS-232 performance from a single +3.0V to +5.5V supply. Applications include battery-powered equipment, hand-held equipment, peripherals, and portable diagnostics equipment.

• Integrated charge pump circuitry simplifies power requirements
• Eliminates the need for a ±12 supply
• Operation from a single +3.3V or +5V supply
• 1µA supply current in shutdown mode saves power
• AutoShutdown feature is enabled after no activity on receiver inputs for 30µs
• Supply current (shutdown) is 1.0µA typ at active-low FORCEOFF=GND, VCC=3.3V or 5.0V, TA=+25°C
• Maximum data rate is 120kbps min at RL=3kohm, CL=1000pF, one transmitter switching
• Receiver propagation delay is 0.3μs typ at Receiver input to receiver output, CL=150pF
• 28 SSOP package
• Temperature range from -40°C to +85°C

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party