MAX4123ESA+

The MAX4123ESA+ is a single, wide bandwidth, low power, single supply rail to rail I/O operational amplifier (op-amp) in 8 pin NSOIC package. This device operate either in a single supply (+2.7V to +6.5V) or dual supplies (±1.35V to ±3.25V) with a common-mode voltage range that extends 250mV beyond VEE, VCC and capable of driving 250 ohm loads. This op-amp require only 650µA quiescent current per amplifier with its rail to rail input common-mode range and output swing, amplifier is ideal for low voltage, single supply operation. Although the minimum operating voltage is specified at 2.7V, the device typically operate down to 1.8V. In addition, low offset voltage and high speed makes it ideal signal-conditioning stages for precision, low voltage and data acquisition systems. It has a 5MHz gain bandwidth product and characterized with a shutdown mode in which the outputs are placed in a high impedance state and the supply current is reduced to only 25µA per amplifier.

• Stable with 500pF capacitive loads
• Operating temperature range from -40°C to 85°C
• Unity gain stable
• No phase reversal for overdriven inputs
• Input offset voltage of 200µV
• Power supply rejection ratio of 100dB at VCC = 2.7V to 6.5V
• Slew rate of 2V/µs

애플리케이션

Signal Processing, Sensing & Instrumentation, Industrial

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party