아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
MAX924ESE+
Analogue Comparator, Low Voltage, Micropower, 4 Comparators, 12 µs, 2.5V to 11V, ± 1.25V to ± 5.5V
- 제조업체 부품 번호:
- MAX924ESE+
- 주문 코드:
- 2515084
- 기술 데이터 시트:
- MAX924ESE+ Datasheet
제품 개요
The MAX924ESE+ is a quad micropower low voltage comparator in 16 pin NSOIC package. This ultra low power comparator includes an internal 1.206 ±1% voltage reference and TTL/CMOS outputs that sink and source current. It is ideal for 3V or 5V single supply applications and each comparator's input voltage range swings from negative supply rail to within 1.3V of positive supply. The unique output stage of MAX924 continuously sources 40mA current and by eliminating power supply glitches that commonly occur when comparators change logic states, MAX924 minimize parasitic feedback which makes it easier to use. It is used in battery powered systems, threshold detectors, window comparators and oscillator circuits.
- Single supply voltage range from 2.5V to 11V and dual supply voltage range from ±1.25V to ±5.5V
- Operating temperature range from -40°C to 85°C
- Input voltage range includes negative supply
- 12µs propagation delay at 10mV overdrive (5V operation)
- No switching crowbar current
- Supply current of 5.5µA at TA = +25°C (5V operation)
- Input offset voltage of ±10mV
- Common mode rejection ratio of 0.1mV/V and power supply rejection ratio of 0.1mV/V
- Comparator voltage noise of 20µVrms at 100Hz to 100KHz
- Internal precision reference of 1%
- Battery-Powered Applications; Oscillator Circuits; Threshold Detectors; Window Comparators
애플리케이션
Signal Processing
제품 정보
기술 문서 (1)
필터 도구