NC6FX

The NC6FX from Neutrik is a 6 pole female XLR cable connector. This industry standard XLR cable connector is easy to assemble with only four parts and no screws. It has compact design with sturdy die-cast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. Boot with rubber gland gives high protection against bending stresses. The coloured rings and boots available for coding and marking. The cable outer diameter of this XLR connector ranges from 3.5mm to 8mm.

• Long lasting and durable
• Contact resistance is less than or equal to 3mohm
• Rated voltage is less than 50V and rated current per contact is 7.5A
• UL ECBT2.E135070 certified
• Maximum wire size is 18AWG (1mm²) and greater than 1000 mating cycles
• Silver plated brass solder contacts, polyurethan boot and polyamide insert material
• Steel latch lock and zinc die-cast shell with nickel plating
• Flammability rating meets UL94 HB
• IP 40 protection class and IEC 61076-2-103 compliant
• Temperature range from -30°C to 80°C

애플리케이션

Audio, Consumer Electronics