아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
TEXAS INSTRUMENTS AM26C32CN
Quadruple Differential Line Receiver IC, 10 Mbps, RS422, RS423 Interface, 4.5 V to 5.5 V, DIP-16
- 제조업체 부품 번호:
- AM26C32CN
- 주문 코드:
- 3118759
-
- ECAD / MCAD
-
제품 개요
The AM26C32CN is a quadruple differential Line Receiver for balanced or unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design specifies that if the inputs are open, the outputs always are high. The AM26C32 device is manufactured using a BiCMOS process, which is a combination of bipolar and CMOS transistors. This process provides the high voltage and current of bipolar with the low power of CMOS to reduce the power consumption to about one-fifth that of the standard AM26LS32, while maintaining AC and DC performance.
- Meets/exceeds requirements of ANSI TIA/EIA-422-B, TIA/EIA-423-B & ITU recommendation V.10/V.11
- 10mA Typical low power
- ±7V Common-mode range with ±200mV sensitivity
- 60mV Typical input hysteresis
- 3 State outputs
- Input fail-safe circuitry
- Available in Q-Temp automotive
- 17ns Typical tpd
- 2kV ESD
- 10Mbps Signalling rate
애플리케이션
Automotive, Motor Drive & Control, Sensing & Instrumentation, Consumer Electronics, Test & Measurement
경고
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
제품 정보
기술 문서 (1)
3 재고
3-4 영업일 이내에 배달 가능한 재고 3 영국
재고가 소진될 때까지 주문 가능
필터 도구