페이지 인쇄
AM26LV31EIPWR
Line Driver RS422, 4 Drivers, 3V-3.6V supply, TSSOP-16
이미지는 참고용으로만 제공됩니다. 자세한 내용은 제품 설명을 참조하세요.
제품 정보
제조업체 부품 번호AM26LV31EIPWR
주문 코드3119092
IC TypeRS422 / RS485 Transmitter
No. of Receivers-
No. of Transmitters4
Communication ModeHalf Duplex
Data Rate Max32Mbps
Supply Voltage Min3V
Supply Voltage Max3.6V
IC Case / PackageTSSOP
No. of Pins16Pins
No. of Nodes32
ESD Protection±8 kV (Contact), ±15 kV (Air Gap), ±15 kV (HBM)
Fail Safe-
Operating Temperature Min-40°C
Operating Temperature Max85°C
Product Range-
Qualification-
제품 개요
The AM26LV31EIPWR is a quadruple differential Line Driver with 3-state outputs. This low-voltage high-speed driver has ±15kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8kV ESD (IEC61000-4-2, Contact Discharge) protection. This device is designed to meet TIA/EIA-422-B and ITU Recommendation V.11 drivers with reduced supply voltage. The driver is optimized for balanced-bus transmission at switching rates up to 32MHz. The outputs have high current capability for driving balanced lines, such as twisted-pair transmission lines and provide high impedance in the power-off condition.
- Meets or exceeds standards TIA/EIA-422-B and ITU recommendation V.11
- ESD protection for RS422 bus pins
- 8ns Typical propagation delay time
- 500ps Typical pulse skew time
- ±30mA High output-drive current
- 5ns Typical controlled rise and fall times
- IOFF supports partial power-down-mode operation
- Driver output short-circuit protection
- Glitch-free power-up/power-down protection
- Green product and no Sb/Br
애플리케이션
Industrial
기술 사양
IC Type
RS422 / RS485 Transmitter
No. of Transmitters
4
Data Rate Max
32Mbps
Supply Voltage Max
3.6V
No. of Pins
16Pins
ESD Protection
±8 kV (Contact), ±15 kV (Air Gap), ±15 kV (HBM)
Operating Temperature Min
-40°C
Product Range
-
No. of Receivers
-
Communication Mode
Half Duplex
Supply Voltage Min
3V
IC Case / Package
TSSOP
No. of Nodes
32
Fail Safe
-
Operating Temperature Max
85°C
Qualification
-
기술 문서 (1)
법률 및 환경
원산지:
최종후의 중요 제조 공정이 이루어진 국가원산지:Malaysia
최종후의 중요 제조 공정이 이루어진 국가
최종후의 중요 제조 공정이 이루어진 국가원산지:Malaysia
최종후의 중요 제조 공정이 이루어진 국가
관세 번호:85423990
US ECCN:EAR99
EU ECCN:NLR
RoHS 준수:예
RoHS
RoHS 프탈레이트 준수:예
RoHS
제품 준수 증명서 다운로드
제품 준수 증명서
무게(kg):.000058