AM26LV31EIRGYR

The AM26LV31EIRGYR is a quadruple low-voltage high-speed differential Line Driver with 3-state outputs. This driver has ±15kV ESD (HBM and IEC61000-4-2, air-gap discharge) and ±8kV ESD (IEC61000-4-2, contact discharge) protection. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 driver with reduced supply voltage. The device is optimized for balanced-bus transmission at switching rates up to 32MHz. The outputs have high current capability for driving balanced lines, such as twisted-pair transmission lines and provide a high impedance in the power-OFF condition.

• IOFF supports partial-power-down mode operation
• Driver output short-circuit protection
• Glitch-free power-up/power-down protection
• Accepts 5V logic inputs with 3.3V supply
• 8ns Typical propagation delay time
• 500ps Typical pulse skew time
• ±30mA High output-drive current
• 5ns Typical controlled rise and fall time
• 2.6V Typical differential output voltage with 100Ω load
• 32Mbps Signalling rate
• Green product and no Sb/Br

애플리케이션

Signal Processing