입고 시 알림 요청
수량 | 가격 |
---|---|
1+ | ₩309,034 |
5+ | ₩299,755 |
10+ | ₩290,491 |
50+ | ₩284,682 |
100+ | ₩278,872 |
제품 정보
제품 개요
A10P-5T is an A series is broad line of ultra-miniature, DC to HV DC converter that set an industry standard in high voltage miniaturization. This unique package occupies less than one tenth of a cubic inch of volume, and an extremely low profile of only 6.35mm. The output is directly proportional to the input voltage and is linear from <lt/>0.7V input to maximum input voltage, allowing for an adjustable output voltage. Output is load dependent. Isolation permits <lt/>±500V bias on output return. No external components or minimum load are required. A separate high impedance control pin is standard and is designed for external error amplifier and/or DAC control in closed or open loop systems. Or simply connect control pin to the + input for proportional input to output operation. Applications include avalanche photo diodes, photo multiplier tubes, electrophoresis, capacitor charging, sustaining ion pumps, piezo devices and handheld instruments.
- 0 to +1000V output voltage, 1mA output current
- 5V input voltage, <lt/>500mA full load current
- 0.7VDC turn-on voltage
- Short circuit protection, no minimum load
- 3 year warranty, 500V input to output isolation (<lt/>±500VDC bias on output return)
- Component-sized converter ideal for applications requiring minimal size and weight
- Protected against short circuit conditions for a minimum 1 minute
- UL (IEC/UL/CSA/EN 62368) approved
- Operating temperature (case) range from -25 to +75°C
- Dimension is 6.35 x 11.43mm x 23.37mm (H x W x L)
기술 사양
Proportional
Adjustable
1mA
0V
700mV
A Series
Positive Output
1W
Through Hole
1kV
5V
기술 문서 (1)
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:Vietnam
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서